CONSTRUCTION:
FLANGE
Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide with 1/4" return.
CABINET
Fabricated of type 304 (18-8) 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges.
DOORS
Fabricated of type 304 (18-8), 18 gauge stainless steel, warp resistant, with full length piano hinge and tumbler lock keyed like other Bradley units.
TOWEL DISPENSER
Fabricated of type 304 (18-8) 22 gauge stainless steel. Rolled edge on dispenser opening.
WASTE RECEPTACLE INSERT
Fabricated of leakproof molded plastic.
CAPACITY:
Towel Dispenser - 450 multi-fold or 250 C-fold paper towels. Waste Receptacle Insert - 5.3 gal. (.71 cu. ft.)
OPERATION:
Towel dispenser holds multi-fold or C-fold towels without use of special adaptor. Waste receptacle insert removable by unlocking receptacle door.
INSTALLATION:
Recessed unit requires rough wall opening 12-1/2"W x 57-11/32"H x 4"D (Semi-recessed unit only 2" deep). Top of wall opening 6'-5" above finished floor. Secure to framing with mounting screws (included) at holes provided. Shim at screw points as required.
GUIDE SPECIFICATION:
Recessed combination towel dispenser and waste receptacle shall be fabricated of type 304 (18-8) 22 gauge stainless steel with exposed surfaces in satin finish. Doors of nonflexing construction, equipped with full length piano hinges and tumbler locks. Towel dispenser capacity 450 multi-fold or 250 C-fold towels. Removable 5.3 gal. leakproof molded plastic insert for waste receptacle.
Overall dimensions: 14"W x 58-3/4"H x 4"D.
Recessed Combination Towel Dispenser and Waste Receptacle shall be Bradley Model 2251.
