CONSTRUCTION:
FLANGE
Fabricated of type 304 (18-8) 22 gauge stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide with 1/4" return.
CABINET
Fabricated of type 304 (18-8) 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges.
DOORS
Fabricated of type 304 (18-8) 18 gauge stainless steel. Warp resistant, with full length piano hinge and tumbler lock keyed like other Bradley units.
TOWEL DISPENSER
Fabricated of 304 (18-8) 22 gauge stainless steel. Rolled edge on dispenser opening.
WASTE RECEPTACLE INSERT
Fabricated of leakproof molded plastic.
CUP DISPENSER (Optional)
Fabricated of type 304 (18-8) 22 gauge stainless steel.
CAPACITY:
Towel Dispenser - 1100 single fold, 800 multi-fold or 500 C-fold paper towels; Waste Receptacle Insert - 8.2 gal. (1.1 cu. ft.); Cup Dispenser (optional) - 100 3-oz. cups.
OPERATION:
Towel dispenser holds single-fold, multi-fold or C-fold towels with use of special adaptor. Waste receptacle insert removable for servicing by unlocking cabinet door.
INSTALLATION:
Recessed unit requires rough wall opening 15-3/4" x 54-3/4"H x 7-1/2"D (Semi-recessed unit only 3-1/2" deep). Top of wall opening 5'-2" min. to 6'-6" max. above finished floor. Secure to framing with mounting screws (included) at holes provided. Shim at screw points as required.
OPTIONAL FEATURE:
Cup Dispenser (Suffix: -27)
GUIDE SPECIFICATION:
Recessed combination towel dispenser and waste receptacle shall be fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in satin finish. Cabinet doors with full piano hinge and secured by tumbler locks. Towel dispenser capacity 1100 single-fold, 800 multi-fold or 500 C-fold towels. Removable 8.2 gal. leakproof molded plastic insert for waste receptacle.
Overall dimensions: 17-1/8"W x 56"H x 7-1/2"D.
Recessed Combination Towel Dispenser and Waste Receptacle shall be Bradley Model 238.
