- ADA Compliant
- Reliable Infrared Metering Activation
- LED Light Indicators for Low Battery & Low Soap Refill
- Battery Powered (4) "D"-cell Batteries, not Included
- 5-1/2" Spout
CONSTRUCTION:
SPOUT ASSEMBLY
Fabricated of chrome plated plastic. Has LED light indicators:
(Yellow flashing light) = low battery.
(Red flashing light) = low soap.
MOTOR ASSEMBLY
Fabricated of plastic. Soap cartridge size automatically set for 1000 shot (27 oz.) bottle. If using 2000 shot (54 oz.) bottle, you need to move switch located under rubber plug, by red reset button, to 2K. Once soap cartridge is installed, press refull reset button (red). This will automatically prime the soap refill bottle and initiate counting mechanism.
BATTERY BOX
Fabricated of plastic, holds 4 "D"-cell Alkaline Batteries (not included).
OPERATION:
Place hands under soap spout and hold for approximately 2 seconds. Spout will dispense Lotion Soap with Moisturizer, Antibacterial soap, or Lotion soap.
SOAP REFILLS:
Bradley offers Lotion soap with Moisturizer in 1000 shot (P19-232B) or 2000 shot (P19-232A) in case quantity only. Bottles are not refillable.
INSTALLATION:
Mount dispenser in 1" diameter hole in lavatory or counter-top 1-1/2" from edge of sink. Shank will accommodate a maximum counter thickness of 2". Place (4) "D"-cell alkaline batteries (not included) into battery box. Plug battery box into motor assembly. Remove white clip from bottom of spout assembly. Insert soap bottle supply tube through spout assembly. Twist and lock soap bottle onto bottom of spout assembly. Reattach white clip to bottom of spout assembly and top of soap bottle. Press and release reset (red) button located on spout assembly.
GUIDE SPECIFICATION:
Sensor operated soap dispenser spout assembly shall be fabricated of chrome plated plastic. Have LED indicators for low soap and low battery. Be able to dispense 0.027 oz. in any of the following soaps: Lotion soap with Moisturizer, Antibacterial, or Lotion soap.
