Home > Products > Lavatory Systems >

MG-3 Express Lavatory System

MG-3 Express Lavatory System
MG-3 Express Lavatory System


 

***Quote only item, please call (909)393-0186. Item cannot be ordered online. Custom Order- Ships in 2-3 weeks, NonCancelable,NonReturnable




Availability:: Usually Ships in 1 to 2 Weeks
Product Code: MG-3

Water heater

Water Heater*:


Qty:  
Description
 
  • ADA and TAS Compliant
  • Serves One to Three Users at a Time
  • Standard Lavatory Spacing on 30" Centers
  • Continuous Bowl, Sprayhead and End Caps are Constructed of Terreon® Solid Surface Material
  • Available in 24 colors
  • Reliable Plug-in, Battery or ndite™ Powered Infrared Activation, Push Button Air Valve, or TouchTime® Metering Control
  • Optional Tankless Electric Water Heater

Specifications

The flowing "wave" design accommodates one to three users. Units handle washroom traffic quickly and economically, while providing each user with their own personal space. Lavatories for the system are positioned on 30" centers. The preassembled sprayhead module is equipped with independent aerators, each served by separate infrared sensing module and solenoid valve (Model MG-3/IR) or (Model MG-3/NDT), push button air metering valve (Model MG-3/AST4), push button TouchTime

® electronic metering control (Model MG-3/TT) or independent battery IR sensor and batteries (Model MG-3/BIR3). Operating range is 20–80 PSI. Flow restrictor keeps flow rate constant at all pressures. Flow rate: .5 GPM

Construction

Bowl, Sprayhead and Pedestal End Caps

Constructed of Terreon®, a densified solid surface material composed of polyester resin. Terreon® is resistant to chemicals, stains, burns, and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.

Support Frame and Access Panel

Bowl assembly and pedestal end caps are secured to a heavy gauge stainless steel support frame mounted to the wall. The contoured front access panel is constructed of 300 series stainless steel.

Vandal Resistance

The molded solid surface sprayhead is an integral part of the bowl module. A free-spinning collar protects the aerator from vandalism. The infrared sensor will automatically shut off water flow after 30–45 seconds if a vandal attempts to trigger constant operation by covering the sensor, or by placing a stationary object in the sensor’s detection area. Push buttons are secured to the unit from inside the sprayhead. Air valves, water supplies and waste are concealed within the pedestal/support frame assembly.

Code Compliance and Certifications

ANSI Standards:

Terreon® is NAHB certified to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-1-2001.

UPC Approval:

The Express Lav Systems are Uniform Plumbing Code (UPC) approved through the International Association of Plumbing and Mechanical Officials (IAPMO).

Standard Height Mounting

The Express Lavatory System model MG-3 mounted at standard height is designed to comply with all ADA guidelines on reaches, clearances and operation. To comply with ADA, the rim height of the Express Lavatory System bowl must be 33.5" maximum above the finished floor.

Juvenile Height Mounting

The Express Lavatory System model MG-3 is designed to mount at different heights to comply with guidelines on reaches, clearances and operation for various codes including, ADA Accessibility Guidelines for Buildings and Facilities (ADAAG) and TAS (Texas Accessibility Standards). Always check your local and state codes.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Products > Lavatory Systems
Products