ADA, ANSI and UFAS Compliant
Constructed of Vandal Resistant-Terreon
® Solid Surface Material
Available in 21 Colors
Choose from a Terreon® Sprayhead or a "Bowl Only" model with your choice of faucet
Optional Deck-Mounted Soap Dispensers
Mount with optional surface bracket by Bradley or in-wall carriers by others
Optional Tankless Electric Water Heater
Specifications
Wall-hung single station fixture. Designed specifically for high traffic commercial hand washing applications. The preassembled sprayhead module is equipped with an independent stream-former that is served by an infrared sensing module and solenoid valve (Model SS-1N/IR), an independent battery IR
sensor and battery (Model SS-1N/BIR3) or a pushbutton
Touch Time
® electronic metering valve (Model SS-1N/TT). Standard flow rate of .5 GPM meets industry standards for water conservation, while providing enough water to rinse hands quickly and efficiently. Operating range is 20–80 PSI. Construction Bowl and Sprayhead Constructed of Terreon®, a densified solid surface material composed of polyester resin. Terreon® is resistant to chemicals, stains, burns, and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives. Acrylic Trap Cover Optional trap cover is composed of vacuum-formed acrylic laminate. It is highly resistant to impact, abrasion, acid and corrosion. The panel will not chip, peel or flake. This option is not compatible with a tankless electric water heater or a sensor-operated soap dispenser. Stainless Steel Trap Cover The optional stainless steel trap cover is constructed of 22 gauge Type 304 stainless steel with a #4 finish and is mounted with (4) 1/4"-20 fasteners (supplied by others) into (4) wall anchors (supplied by others). The stainless steel trap cover is compatible with a tankless electric water heater or a sensor-operated soap dispenser. Vandal Resistance The molded sprayhead is bolted securely to the lavatory bowl. The Terreon ® material is resistant to chemicals, stains, burns and impact. Damage is repairable. The chrome plated brass streamformer and activation mechanism are secured to the unit from inside the sprayhead module. The infrared sensor will automatically shut off water flow after 30–45 seconds if a vandal attempts to trigger constant operation. TouchTime® activation is electronically controlled at 15 seconds. Optional trap covers conceal all below deck valving, connnections and other optional items. Code Compliance and Certifications ANSI Standards Terreon® is NAHB certified to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-1-2001. UPC Approval The Express Lav Systems are Uniform Plumbing Code (UPC) approved through the International Association of Plumbing and Mechanical Officials (IAPMO). Mounting The Express® SS-1N is designed to mount at different heights (adult and children) to comply with guidelines on reaches, clearances and operation for various codes including, ADA Accessibility Guidelines for Buildings and Facilities (ADAAG) and TAS (Texas Accessibility Standards). Always check your local and state codes.The SS-1N can be supported by a surface-mounted bracket supplied by Bradley or in-wall carriers supplied by others. The surface-mounted bracket is constructed of 1" square structural tubing and is zinc-plated mild steel. The surface-mounted bracket also includes a locking device and leveling screws.
Construction
Bowl and Sprayhead
Constructed of Terreon®, a densified solid surface material composed of polyester resin. Terreon® is resistant to chemicals, stains, burns, and impact. Surface damage can be easily repaired with everyday cleansers or fine grit abrasives.
Acrylic Trap Cover
Optional trap cover is composed of vacuum-formed acrylic laminate. It is highly resistant to impact, abrasion, acid and corrosion. The panel will not chip, peel or flake. This option is not compatible with a tankless electric water heater or a sensor-operated soap dispenser.
Stainless Steel Trap Cover
ANSI Standards
Terreon® is NAHB certified to meet ANSI Z124.3, Z124.6 and ANSI/ICPA SS-1-2001.
UPC Approval
The Express Lav Systems are Uniform Plumbing Code (UPC) approved through the International Association of Plumbing and Mechanical Officials (IAPMO).
Mounting
The Express® SS-1N is designed to mount at different heights (adult and children) to comply with guidelines on reaches, clearances and operation for various codes including, ADA Accessibility Guidelines for Buildings and Facilities (ADAAG) and TAS (Texas Accessibility Standards). Always check your local and state codes.The SS-1N can be supported by a surface-mounted bracket supplied by Bradley or in-wall carriers supplied by others. The surface-mounted bracket is constructed of 1" square structural tubing and is zinc-plated mild steel. The surface-mounted bracket also includes a locking device and leveling screws.
