Submit search
Specifications
Standard Equipment
Cabinet
Frame is stainless steel and requires floor anchoring. Cabinet exterior is 3/4" plywood with laminate finish in Formica #925 Champagne. Interior finishes are laminate and satin finish stainless steel. Doors have rounded corners for greater patient safety, and will support a 250 lb. static load via full length stainless steel piano hinges welded directly to frame. Toilet tissue holder is conveniently located inside the cabinet door. Side mounted bedpan washer with drain is concealed behind a separate cabinet door.
Countertop
Standard finish for MDF/laminate countertop is Wilsonart #4633 Natural Nebula. Other countertop selections include other laminates, stainless steel or Terreon
Lavatory
Lavatory is 14 gauge stainless steel with factory-installed caulking. Measures 14-1/2"x 9-1/2"x 5" deep. Traps and stops complying with local codes to be furnished by plumbing contractor.
Toilet
Toilet and support assembly are constructed of heavy gauge stainless steel. Siphon jet type toilet has an elongated bowl, integral flushing rim, remote-actuated hydraulic flushing system with push button, and a white seat with self-sustaining hinge. Toilet pivots into room and locks in position when cabinet door is open. 25PSI minimum is required for flushing. Trap has a 3-1/2" seal that will pass a 2-1/8" diameter ball and is fully enclosed. Toilet is anchored to floor and will support a 2,500 lb. static load. A 1.6 gallon per flush (low flow) toilet is standard. Toilet assembly meets ANSI/ASME A112.19.2.