|
|
|
Bradley Lenox Cubby Locker Technical data Last Updated: 03/24/2008 |
||
|
Bradley Lenox Cubby Lockers
Tough, attractive, solid plastic never needs painting, resists dents and scratches
Impervious to moisture cubby will not rust or delaminate Durable, vandal resistant all-welded construction Wide range of sizes, colors and options 20 year warranty against rust, delamination or breakage under normal use* US Patent Numbers 6,685,285 6,792,661 6,793,299 7,029,078 7,223,317 7,278,695 Construction - Standard Features Standard Sizes: A = 12" 15" 18" Wide B = 12" 15" 18" Deep C = 8-1/4" 11-1/4" 14-1/4" Opening Width D = 24"**, 36"**, 48"**, 60", 72" Tall 1-6 Tier Frames Constructed of ½" thick High Density Polyethylene (HDPE) with homogeneous color and a matte fi nish texture. Dirt or graffi ti are easily removed with standard industrial clea ners. Frames are welded to cubby box to provide a secure, rigid
assembly. Frame width is 1-7/8" on each side. Frame divider height is 1". Sides, Tops, Bottoms and Dividers Constructed of 3/8" thick white HDPE with a smooth fi nish. Sides and back of box are formed from a single sheet of HDPE with fused corners. Tops, bottoms and dividers are welded to box to form a complete unit without metal fasteners or dovetail joints. Construction - Optional Features Slope Top Model LENOXSLOPETOP Constructed of a 1" thick HDPE backplate (color may vary) and a 1/2" thick colored HDPE slope top panel. Provides a fi nished look and prevents accumulation of dust and storage of items on top of cubby lockers. Back plate secures to wall fi rst, then panel is secured through the cubby locker top from the inside no exposed fasteners. Standard slope is 10°. Available in single cubby locker size or in 24", 30", 36", 45" and 72" len gths. All necessary
hardware included. * Normal use further defined as lockers installed in a climate-controlled environment, away from direct sunlight. Base Model LENOXBASE Constructed of 1" thick HDPE with homogeneous color and a matte fi nish texture. Base is 3" tall and set back 3" from cubby locker front to provide toe clearance. Notched end caps provide ease of installation. Installation hardware, including screws, anchors, L-brackets and mending plates are included. End Panels Model LENOXENDPANEL Constructed of 3/8" thick HDPE with homogeneous color and a matte fi nish texture. End panels cover white cubby sides on exposed ends and are available in fl at or slope top styles and in single or double (back-to-back) confi gurations.
All necessary hardware included. Flat Top Model LENOXFLATTOP Constructed of 3/8" or 1/2" thick HDPE with homogeneous color and a matte fi nish texture. Provides a fi nished look on top of cubbies. Available in single cubby size or in 24", 30", 36", 45" and 72" lengths. Hardware not included. Fillers - Model LENOXFILLER Constructed of 1/2" thick HDPE secured to 3/8" thick HDPE angle bracket. Filler is attached through the inside of an end or corner cubby to fi ll gaps between cubbies and a wall or another cubby in a corner. Available in colors to match cubbies 24", 36", 48", 60" or 72" tall, 6", 12", 15" and 18" wide. All necessary hardware included. Coat Hook Double hook constructed of black polycarbonate. Furnished in 60" and 72" two-tier cubbies only. Hook hang
|