Master Building Specialties Prices for:Home > Products > Bathroom Partitions > Bobrick Washroom Equipment > Trimline 1030 Series

Bobrick Trimline series restroom partitions

Stainless Steel Edge Trim / Steel Core Stiles

  • Impact resistant plastic laminate and particle board construction. 
  • Stainless steel edge trim for design accent and protection.
  • Steel-core reinforced stiles for maximum structural stability of restroom partitions.
  • Specify for moderate use restroom: commercial, healthcare, foodservice. 
  • Featuring Overhead Braced, with Floor-Anchored and Ceiling- Hung restroom partitions also available.
  • New continuous hardware option provides privacy and increased durability.

 D354 Designer White

1573 Frosty White

 1500 Grey

 D315 Platinum

 D73 Pewter

D91 Slate Grey 

 1572 Antique White

 D90 Natural Almond

1530 Beige 

D97 Haze 

D50 Khaki brown

 D337 Pebble

 D96 Shadow

D14 Port 

 D321 Brittany blue

 D25 Atlantis

 4621 White Nebula

1595 Black 

 4142 Grey Glace

4622 Grey Nebula 

 4623 Graphite Nebula

 4609 Caldera Rose

 4608 Caldera Beige

4143 Neutral Glace 

 4814 Tungstun EV

 4669 Natural Tigris

4738 Ochre Roletta 

1787 Oxide 

 7054 Wild Cherry*

7040A Figured Mahogany *

 

4624 Beige Nebula

4632 Teal Nebula

4630 Cloud Nebula

4759 Mystique Marine

4552 Ebony Star

 

* Woodgrain partitions have vertical grain direction only. Woodgrain panels wider than 60" will be spliced, joining the pieces onto the particle board core for an additional charge.
Plastic laminate colors  above are reproductions and are for descriptive purposes only. request physical sample for absolute color fidelity.
All Wilsonart Colors are available, however colors not shown  here are subject to extra charges and longer lead times.

Specifications / Standard Material  Construction

Bobrick Trimline series restroom partition Material

Restroom partition doors, stiles and panels: 1" thick, 3ply, 45lb density, impact resistant particle board construction; scratch, graffiti and corrosion resistant 0.050" thick, plastic laminate  surfaces; laminate routed for flush fit of stainless steel edge.

Bobrick Trimline series restroom partition Hardware

Heavy-duty type 304 satin finish stainless steel; for emergency access, door lifts from outside. Hinge can be adjusted for a partial opening or self-closing door; patented, one-piece shoe conceals stile leveling device.

Bobrick Trimline series restroom partition Stile Base, Leveling Device

11-gauge steel core welded to 3/8" x 7/8" steel leveling bar, forming a single structural unit. Furnish sleeve anchors require minimum 2" penetration into minimum 3" thick structural concrete floor.

 
Bobrick Trimline series restroom partition Threaded Inserts

Threaded inserts are factory installed for securing hinges on restroom partitions. New vandal resistant, pin headed Torx screws for mounting door hardware (available Fall, 2000); saves installation time and costs. T-nuts are factory installed for securing door latch.

Optional Features

Bobrick Trimline series restroom partition Optional Continuous Hardware

All restroom partition configurations. Extra heavy duty, type 304 satin finish stainless steel; angle brackets, U channels and spring loaded, self closing hinge run full height of panels and doors; for emergency access, door lifts from outside; all fasteners are new pin head Torx screws; patented, one piece shoe conceals stile leveling device.