Master Building Specialties Prices for:Home > Products > Bathroom Partitions > Bradley / Mills > Baked Enamel

Sentinel™ Floor Mounted- Overhead Braced

Series 400 Toilet partitions

 

This style provides the most economical solution for heavy traffic and vandalism prone areas. Because it requires no special floor or ceiling construction, installation is easy in new or old buildings. The anti-grip rail provides outstanding rigidity.

  • 15 year warranty against rust-out.

  • Low cost. Recommended for office buildings, restaurants, religious institutions.

  • 21 standard colors. Custom colors available. High-quality gloss finish.


For color selections  Click this link

Specification / Material Construction 

Permaseal  Panels       

Bradley / Mills toilet partition panels consist of two sheet metal faces spaced and insulated with a moisture resistant, honeycomb core, adhered to the inner surfaces with a moisture-resistant adhesive and set under pressure for 24 hours. Toilet partition edges are formed to interlock together to provide a watertight fit without loose crown molding. Corners are welded and finished smooth. Panels are minimum 1. thick, unless otherwise indicated. Continuous panel and wall angles shall be single piece for all wall and pilaster connections. Baked Enamel Panels are manufactured from domestic 22 gauge galvannealed sheet metal. Bradley / Mills toilet  partitions are cleaned, primed and finished with automatically applied electrostatic high grade synthetic enamel, and oven baked to provide a mar-resistant finish. Bradley / Mills offers 18 standard colors and custom colors are available.

Permaseal Doors

Bradley / Mills   1" thick toilet partition doors will be no lighter than 22 gauge and will be constructed in same manner as panels. Includes internal 16 and 14 gauge welded reinforcements at top and bottom hinges, factory-install concealed molybdenum cam, drilled door top to receive top hinge pin providing three-point anchor, and pre-punched latch holes. Baked enamel Doors shall permit field installation of integral ADA-approved slide latch.

Permaseal Pilasters(Fronts )   

Bradley / Mills baked enamel Pilasters (fronts) feature same interlocking construction and finish as panels; minimum 1-1/4. thick. Constructed of 20 gauge material. Secures to floor by fitting over full-width 16 gauge internal channel. Top bracing of aluminum etched and anodized 1" x 1-1/2. "anti-grip" clamp over fronts and securely held by screws to the front. Partition floor fastenings are concealed by 3" high one-piece shoe of #304 bright annealed stainless steel secured in place with concealed retainer clips Hardware. Restroom partitions shall be provided with all hardware and fastenings to provide a complete installation.

Door Hardware

Bradley / Mills toilet partitions offer heavy duty institutional non-ferrous with heavy bright chrome plate or stainless steel with brushed finish. Hinge brackets are wrap around and thru-bolted to the fronts with true gravity cams concealed within the door. Concealed slide latch T-290 with "emergency lift release" requires no twisting motion and meets all ADA standards. Strike keeper is surface mounted or wrap around type. Coat hooks and wall bumpers constructed in same material and finish as door hardware.

Fittings

Brackets are non-ferrous heavy duty chrome plated or stainless steel with brushed finish. Fasteners for hinges, slide latch and keeper are chrome plated or stainless steel theft-proof. this is standard for Bradley / Mills baked enamel restroom partitions.