Classic Wash Fountain parts & service Guide Classic Wash Fountain parts & service Guide |
Introduction to Bradley Washfountains
The Benefi ts of Specifying Bradley Washfountains Introduction to Bradley Washfountains
The Benefi ts of Specifying Bradley Washfountains |
BARRIER-FREE WASHROOM PLANNING GUIDE THE ADA AND UNIVERSAL DESIGN The ADA Title III requires all new construction of public accommodations and commercial facilities meet or exceed ADAAG specifications. All additions and substantial alte |
Tb-45 BOBRICK WASHROOM EQUIPMENT THAT CONFORM TO U.S. FEDERAL SPECIFICATIONS The attached Bulletin lists Federal Specifications, Commercial Item Descriptions (CIDs), and the Bobrick Models that may be submitted in appropriate classifications. Selections from this guide should |
TB-55 Locating Accessories inside the Toilet Partition PARTITION-MOUNTED ACCESSORIES • Accessories in a toilet partition should be positioned to be within easy reach from the toilet. All accessories should be accessible on a side wall or partition. • Bob |
TB-32 Suggested Mounting Systems for Ceiling hung toilet partitions Provisions must be in the construction of the building to support ceiling-hung toilet partitions. Structure in ceiling, not furnished by Bobrick, must support at least 200 lb per laminated-plastic par |
TB-46 Suggested Mounting Systems for Floor-Anchored and Overhead Braced Toilet Partitions LEVELING DEVICE The steel-core reinforced stiles of Bobrick floor-anchored and overhead-braced toilet partitions are constructed with an 11-gauge steel core welded to a 3/8'' thick leveling bar. Each |
TB-86 2006 MODEL CODE CHANGES The 2006 editions of the International Code Council (ICC) plumbing (IPC) and building (IBC) codes, and the National Fire Protection Association® (NFPA) NFPA 101® Life Safety Code® are now available. A |
TB-15 THE COST OF PAPER TOWELS VS. HAND DRYERS Bobrick Hand Dryers : 1) Bobrick Hand Dryers draw 2300 watts (2.3 kW) of electricity while operating and have a 30-second drying cycle. 2) 1 hour of operation = 30 seconds per drying cycle x 120 dryi |
Tb-44 CAPACITIES OF BOBRICK FOLDED PAPER TOWEL DISPENSERS CAPACITIES OF BOBRICK FOLDED PAPER TOWEL DISPENSERS A top-quality, two-ply towel, heavily creped and embossed, will yield relatively few towels to the cabinet inch; a hard finished, single-ply towel |
TB-62 WHEELCHAIR MANEUVERABILITY DRAWING TEMPLATE A DESIGNER'S AID FOR CHECKING BARRIER-FREE ROOM LAYOUTS Architects concerned with designing buildings that will be “accessible to and usable by the physically handicapped” will find the Bobrick “Wheel |
TB-63 CONCEALED TOWEL CABINET FACILITATES CODE COMPLIANCE Bobrick Model B-318 paper towel dispenser provides a versatile element for the design professional. It permits construction or renovation of small spaces that still serve washroom users effectively an |
Restroom Partitions & ADA Compliance by Bradley The following information is provided as a summary of currently available data in the industry. It is NOT intended to be an interpretation of ADAAG, rather a reference for further research. Reference |
CSI Specification Guidelines Section 15400 Specifier notes are shown in italics and should be deleted from
the final document. Generally all of the manufacturer’s products in
this category are listed and the specifier must take care to dele |
Bradley Column beach Shower COL-5C-HN, COL-4C-HN, COL-3C-HN, COL-2C-HN Installation
Installation Instructions for Column Shower
Step 1: Install column shower components
NOTE: Flush supply lines before making connections.
1. Remove the five bolts that secure the disposabl |
Emergency Fixtures Parts Breakdown This File is a photographic breakdown of the Emergency Fixtures (i.e. Emergency eyewash and showers) parts list. |
TB-75 TYpes Of Stainless Steel Stainless steel is a term covering more than fifty alloys of steel, all with chromium and additives to counteract the rusting of iron, the basic mineral in steel. Many of the stainless varieties are |
Bradley Lenox Pedestal Bench Installation Bradley Lenox Locker Pedestal Bench Installation
1. Position each pedestal on the underside of the bench. Mark the hole locations and remove the pedestals. Using a 3/16" drill bit, drill 1/2" deep |