Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide with 1/4" return.
Fabricated of type 304 (18-8) 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges.
Fabricated of type 304 (18-8), 18 gauge stainless steel, warp resistant, with full length piano hinge and tumbler lock keyed like other Bradley units.
Fabricated of type 304 (18-8) 22 gauge stainless steel. Rolled edge on dispenser opening.
WASTE RECEPTACLE INSERT
Fabricated of leakproof molded plastic.
Towel Dispenser - 450 multi-fold or 250 C-fold paper towels. Waste Receptacle Insert - 5.3 gal. (.71 cu. ft.)
Towel dispenser holds multi-fold or C-fold towels without use of special adaptor. Waste receptacle insert removable by unlocking receptacle door.
Recessed unit requires rough wall opening 12-1/2"W x 57-11/32"H x 4"D (Semi-recessed unit only 2" deep). Top of wall opening 6'-5" above finished floor. Secure to framing with mounting screws (included) at holes provided. Shim at screw points as required.
Recessed combination towel dispenser and waste receptacle shall be fabricated of type 304 (18-8) 22 gauge stainless steel with exposed surfaces in satin finish. Doors of nonflexing construction, equipped with full length piano hinges and tumbler locks. Towel dispenser capacity 450 multi-fold or 250 C-fold towels. Removable 5.3 gal. leakproof molded plastic insert for waste receptacle.
Overall dimensions: 14"W x 58-3/4"H x 4"D.
Recessed Combination Towel Dispenser and Waste Receptacle shall be Bradley Model 2251.