Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges.
Fabricated of type 304 (18-8), 18 gauge stainless steel. Warp resistant with full length piano hinge and (2) tumbler locks keyed like other Bradley units.
Fabricated of type 304 (180-8), 22 gauge stainless steel. Folled edge on dispenser opening.
Sensor activation. Universal voltage. European Export available. (To comply with EU Standards, purchase model with option -49.)
WASTE CONTAINER LINER
Fabricated of natural color linear low density polyethylene. - Part # M44-081.
Towel Dispenser holds 710 single-fold, 500 multi-fold, or 370 C-fold paper towels; Waste Container - 4.37 gal. (16.5 L)
Towel dispenser holds single-fold, multi-fold, or C-fold towels without use of special adaptor. Receptacle removable for servicing by unlocking door.
Recessed unit requires rought wall opening 13"W x 54-1/4"H x 5-1/2"D. Top of wall opening 66" min. to 81" max. above finished floor. Secure to framing with mounting screws (included) at holes provided. Shim at screw points as required. Surface-mounted units need to have holes drilled by installer. Mounting screws are included. Please refer to the installation instructions with the hand dryer for directions.
Recessed combination towel dispenser, hand dryer, and waste receptacle shall be fabricated of type 304 (18-8), 18 gauge stainless steel with exposed surfaces in satin finish. Door of warp-free construction, equipped with piano hinge and secured by (2) tumbler locks. Towel dispenser capacity - 710 Single-fold, 500 Multi-fold, or 370 C-fold towels. 4.37 gal. linear low density polyethylene waste receptacle included.
Overall dimensions: 14-7/8"W x 56"H x 6-1/4"D.