Home > Products > Shower Fixtures > Module Shower Stalls >

MM-4030 Bradley Modesty Shower Stall Module

MM-4030 Bradley Modesty Shower Stall Module
MM-4030 Bradley Modesty Shower Stall Module

Custom Order -Ships in 3-4 weeks; NonCancelable, NonReturnable
List Price: $14,409.00
Our Price: $13,060.00 Fixed Shipping Cost of $500
You save $1,349.00!

Product Code: MM-4030

Description Technical Data Installation Instructions
Modesty Module Showers

Models 4000 thru 4036 & Model 4044

(IMPORTANT: Signed approvals are required prior to fabrication.)

Unit Complete with Curtain and Necessary Hardware for Installation

Available with Column or Econowall Showers

Showers Factory Assembled and Hydrostatically tested to 150 PSI

Ready for Hookup to Plumbing Supplies



All exposed materials (except curtain, curtain hooks, and post shoes) are stainless steel polished to a #4 finish or chrome-plated brass.

Column Shower

Constructed of type 304 stainless steel polished to a #4 finish. Column and column cap are 16 gauge and base flange is 13 gauge. Drain fitting is cast iron with five stainless steel mounting bolts. Column is drilled and tapped to accept partition stirrups.

Econo-Wall Shower

Shower panel, mounting frame, and top and bottom covers constructed of 18 gauge stainless steel polished to a #4 finish. Stainless steel soap tray for each station mounted to panel. Standard fixed direction adjustable spray showerhead for each station.

Standard Equipment

Supply Inlets

Supply inlets are 3/4" type L copper tubing.


Fabricated of 20 gauge 300 series stainless steel sheets polished to a #4 finish. Sandwich type construction with waterproof cores securely bonded between sheets. Standard partitions are 58" high. Partitions are secured to column shower and posts with 14 gauge type 304 stainless steel stirrups and stainless steel screws.


Fabricated 18 gauge 1-1/4" square stainless steel tubing. Post is secured to floor with an expansion anchor and a concealed foot angle which allows plus or minus 1/2" vertical adjustment.

Wood seats are 10"W x 33-1/2"L x 16"H varnish finished oak.


Curtain rails fabricated of aluminum rectangular tubing. Curtain hooks are steel wire with a zinc chromate finish. Curtains are 60"W X 74"H and fabricated of heavy gauge translucent vinyl with hemmed edges, and aluminum grommet reinforced eyelets.


All exposed fasteners are vandal-proof and either stainless steel or chrome-plated. Post shoes are anodized aluminum and finished to match stainless steel.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Products > Shower Fixtures > Module Shower Stalls
Products > Shower Fixtures