CONSTRUCTION:
FLANGE
Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide with 1/4" return.
CABINET
Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. One piece seamless construction, 1" wide with 1/4" return.
DOOR
Fabricated of type 304 (18-8), 22 gauge stainless steel with full-length piano hinge and tumbler lock keyed like other Bradley units.
TOWEL DISPENSER
Fabricated of type 304 (18-8), 22 gauge stainless steel. Rolled edge on dispenser opening.
WASTE RECEPTACLE INSERT
Fabricated of type 304 (18-8), 22 gauge stainless steel.
CAPACITY:
Towel Dispenser - 200 multi-fold or 100 C-fold paper towels; Waste Receptacle Insert 1.25 gal. (.2 cu. ft.)
OPERATION:
Towel dispenser holds multi-fold or C-fold towels without use of special adaptor. Waste receptacle removable for easy servicing.
INSTALLATION:
Recessed unit requires rough wall opening 12-1/2"W x 16-1/2"H x 4"D (Semi-recessed unit only 2" deep). Top of wall opening 5'-11" above finished floor. Secure to framing with mounting screws (included) at holes provided. Shim at screw points as required.
GUIDE SPECIFICATION:
Recessed combination towel dispenser and waste receptacle shall be fabricated of type 304 (18-8) stainless steel with exposed surfaces in satin finish. Door of nonflexing construction, equipped with full length piano hinge and tumbler lock. Towel dispenser capacity 200 multi-fold or 100 C-fold towels. Removable 1.25 gal. stainless steel waste receptacle.
Overall dimensions: 14"W x 18"H x 4"D.
Recessed Combination Towel Dispenser and Waste Receptacle shall be Bradley Model 229.
