 |
 |
 |
|
CONSTRUCTION:
CABINET
Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with seamless corners and burr-free edges.
DOOR
Fabricated of type 304 (18-8), 18 gauge stainless steel. Warp resistant with full length piano hinge and (2) tumbler locks keyed like other Bradley units.
TOWEL DISPENSER
Fabricated of type 304 (180-8), 22 gauge stainless steel. Folled edge on dispenser opening.
HAND DRYER
Sensor activation. Universal voltage. European Export available. (To comply with EU Standards, purchase model with option -49.)
WASTE CONTAINER LINER
Fabricated of natural color linear low density polyethylene. - Part # M44-081.
CAPACITY:
Towel Dispenser holds 710 single-fold, 500 multi-fold, or 370 C-fold paper towels; Waste Container - 4.37 gal. (16.5 L)
OPERATION:
Towel dispenser holds single-fold, multi-fold, or C-fold towels without use of special adaptor. Receptacle removable for servicing by unlocking door.
INSTALLATION:
Recessed unit requires rought wall opening 13"W x 54-1/4"H x 5-1/2"D. Top of wall opening 66" min. to 81" max. above finished floor. Secure to framing with mounting screws (included) at holes provided. Shim at screw points as required. Surface-mounted units need to have holes drilled by installer. Mounting screws are included. Please refer to the installation instructions with the hand dryer for directions.
GUIDE SPECIFICATION:
Recessed combination towel dispenser, hand dryer, and waste receptacle shall be fabricated of type 304 (18-8), 18 gauge stainless steel with exposed surfaces in satin finish. Door of warp-free construction, equipped with piano hinge and secured by (2) tumbler locks. Towel dispenser capacity - 710 Single-fold, 500 Multi-fold, or 370 C-fold towels. 4.37 gal. linear low density polyethylene waste receptacle included.
Overall dimensions: 14-7/8"W x 56"H x 6-1/4"D.
|
|
|
 |
|
 |
|
|
|
