- Partition-Mounted - Flush One Side For Grab Bar Installation
- Serves Two Compartments
- Seat Cover Dispenser
- Dual Roll Tissue Dispenser
- Napkin Disposal
CONSTRUCTION:
FLANGE
Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. Flange of one piece seamless construction, 1" wide with 1/4" return.
CABINET
Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. Welded construction with burr-free edges.
DOOR
Fabricated of type 304 (18-8), 18 gauge stainless steel with full length piano hinge and tumbler lock keyed like other Bradley units.
PUSH FLAP DOOR
Fabricated of type 304 (18-8), 22 gauge stainless steel with exposed surfaces in architectural satin finish. Self-closing, with heavy duty stainless steel piano hinge.
WASTE CONTAINER
Fabricated of leakproof molded plastic. 0.88 gal. capacity.
SPINDLES
Fabricated of polyethylene, non-removable by user.
CAPACITY:
Toilet Seat Cover Dispensers - single-fold or half-fold toilet seat covers; Toilet Tissue Dispensers - four standard core toilet tissue rolls through 5-1/4" in diameter.
OPERATION:
Hinged access door permits servicing of components from one side.
INSTALLATION:
Mounts in partition of toilet compartment for physically handicapped. One side flush against partition allows clearance for grab bar (not included) across front of unit. Requires partition opening 15-3/8"W x 28-7/8"H. (Location of hole and dimensions should be noted in partition specifications.) Flanges adjustable for partitions from 3/8" to 4" thick. Remove one flange and install cabinet in partition opening flush against partition. Position flanges on both sides of cabinet and secure with mounting screws (included) at holes provided.
GUIDE SPECIFICATION:
Partition mounting combination unit shall include toilet seat cover dispenser, toilet tissue dispenser, and napkin disposal, and be fabricated of type 304 (18-8) heavy gauge stainless steel with seamless exposed surfaces in satin finish. Fixed flange shall provide for flush mounting on one side for grab bar installation.
Overall dimensions: 17-1/8"W x 30-5/8"H x 4-1/2"D.
Partition-Mounted Combination Unit shall be Bradley Model 5911.
