Knowledge Base:  

You are here: Knowledge Base : overhead
Page of 1
TB-46 Suggested Mounting Systems for Floor-Anchored and Overhead Braced Toilet Partitions
LEVELING DEVICE The steel-core reinforced stiles of Bobrick floor-anchored and overhead-braced toilet partitions are constructed with an 11-gauge steel core welded to a 3/8'' thick leveling bar. Each
Bradley installation instructions Sentinel Series 400 - Overhead Braced
A Comprehensive installation guide for Bradley / Mills Overhead braced partitions. This includes all Baked enamel and stainless steel https://www.bradleycorp.com/download/44/hdwt-instr-009.pdf htt
TB-32 Suggested Mounting Systems for Ceiling hung toilet partitions
Provisions must be in the construction of the building to support ceiling-hung toilet partitions. Structure in ceiling, not furnished by Bobrick, must support at least 200 lb per laminated-plastic par
CSI Specification Guidelines Section 15400
Specifier notes are shown in italics and should be deleted from the final document. Generally all of the manufacturer’s products in this category are listed and the specifier must take care to dele