Tb-45 BOBRICK WASHROOM EQUIPMENT THAT CONFORM TO U.S. FEDERAL SPECIFICATIONS
The attached Bulletin lists Federal Specifications, Commercial Item Descriptions (CIDs), and the Bobrick Models that may be submitted in appropriate classifications. Selections from this guide should |
CSI Specification Guidelines Section 15400
Specifier notes are shown in italics and should be deleted from
the final document. Generally all of the manufacturer’s products in
this category are listed and the specifier must take care to dele |
Bradley Adapt-A-Brad Conversion Specs
Adapt-A-Brad Individual Renovation Shower
WS-1WAB
• Converts Existing In-Wall Hot and Cold Compression Valves to Pressure-Balancing or Mechanical Metering Control
• Comes Complete with Su |
Introduction to Bradley Washfountains
The Benefi ts of Specifying Bradley Washfountains
Introduction to Bradley Washfountains
The Benefi ts of Specifying Bradley Washfountains |
Bradley Adapt-A-Brad Conversion instructions
Installation instructions |
TB-77 Sierra Series LEED Certification Program
Sierra Series LEED Certification Program: Environmental sustainability in architectural design can help contain construction costs and/or reduce annual building operating expenses. The Solid Color Re |
TB-73 SURFACE BURNING CHARACTERISTICS OF VARIOUS TOILET PARTITION MATERIALS
INDEPENDENT LABORATORY TESTING Samples of different toilet partition materials were sent to independent fire test laboratories for testing and evaluation to determine the relative surface burning cha |
TB-34 Threaded Metal Inserts Reinforce Door & Stile hardware in all Bobrick Partitions
Bobrick's standard partitions have superior holding power built in, using Commercial Hardware in an unique nohardware- on-the-outside styling. In doors and stiles with particle board core (TrimLine, D |
TB-78 Impact Resistance of Various Toilet Partition Materials
INDEPENDENT LABORATORY TESTING Three samples of six different partition materials [Powder-Coated Metal (Metal), High Density Polyethylene (HDPE), Polypropylene (Polyprop), Plastic Laminate (P-Lam), So |
TB-80 GRAFFITI RESISTANCE OF VARIOUS TOILET PARTITION MATERIALS
INDEPENDENT LABORATORY TESTING Three samples of different toilet partition materials [Powder-Coated Metal (Metal), High Density Polyethylene (HDPE), Polypropylene (Polyprop), Plastic Laminate (P-Lam), |
TB-82 GENERAL CLEANING AND MAINTENANCE OF 1090 SIERRA™ SERIES TOILET PARTITIONS
FOR ROUTINE CLEANING: Use a soft cloth moistened with mild soap, detergent, or all purpose cleaner to wipe partition surface. Wipe off cleaner residue off using a clean cloth and water. Ensure that p |
TB-83 IMPACT RESISTANCE OF SOLID COLOR REINFORCED COMPOSITE (SCRC) MATERIAL
IMPACT RESISTANCE OF SOLID COLOR REINFORCED COMPOSITE (SCRC) MATERIAL INDEPENDENT LABORATORY TESTING Four samples of Solid Color Reinforced Composite (SCRC) material (both 1/2" and 3/4" thicknesses) |
TB-86 2006 MODEL CODE CHANGES
The 2006 editions of the International Code Council (ICC) plumbing (IPC) and building (IBC) codes, and the National Fire Protection Association® (NFPA) NFPA 101® Life Safety Code® are now available. A |
TB-87 Toilet Partition material LEED information Program
Leadership in Energy and Environmental Design (LED) Certification Program Information Version 2.2: The LEED Rating Systems are developed by the United States Green Building Council ("USGBC"). It is a |
TB-49 CONCEALED ANCHOR PLATES FOR STUD WALL CONSTRUCTION
Bobrick anchor plates are designed for secure installation of all Bobrick grab bars specified for stud wall construction. The hole pattern(s) will accommodate all the mounting screw configurations fou |
BARRIER-FREE WASHROOM PLANNING GUIDE
THE ADA AND UNIVERSAL DESIGN The ADA Title III requires all new construction of public accommodations and commercial facilities meet or exceed ADAAG specifications. All additions and substantial alte |
Restroom Partitions & ADA Compliance by Bradley
The following information is provided as a summary of currently available data in the industry. It is NOT intended to be an interpretation of ADAAG, rather a reference for further research. Reference |
Scranton products Technical Data
TECHNICAL SPECIFICATIONS High Density Polyethylene (HDPE)* has been independently laboratory tested, and are unaffected when exposed to the following substances:
• Acetic Acid |
Scranton Products Color Chart- Solid Plastic Paritions
SOLID PLASTIC BATHROOM PARTITION COLORS
Our partitions are available in a wide array of colors in three distinctive groups that combine for nearly two dozen color choices
|
Scranton Products Color Chart- TuffTec Lockers
TuffTec Locker Colors
TuffTec ™ Lockers, All-Star Athletic Lockers, TuffTike ™ Cubbies and Locker Room Benches are available in a variety of popular, designer colors to co |