Shower panel is type 304 stainless steel polished to a #4 finish. All other exposed parts are stainless steel or chrome-plated brass. Valve bodies are brass casting. Supply inlets are copper tubing.

A 2.0 GPM flow control is standard. (Actual flow may vary,but will not exceed 2.5 GPM Max.)

Shower panel

Shower panel with top and bottom covers constructed of 18 gauge stainless steel polished to a #4 finish. Stainless steel soaptray for each station mounted to panel.

Showerhead

Standard fixed direction adjustable spray showerhead for each station.

Supply Inlets

Partitions

Fabricated of 20 gauge 300 series stainless steel sheets polished to a #4 finish. Sandwich type instruction with waterproof cores securely bonded between sheets. Partitions are secured to posts with 14 gauge type 300 stainless steel stirrups and stainless steel screws.

Posts

Fabricated 18 gauge 1-1/4" square x 80" stainless steel tubing. Post is secured to floor with an expansion anchor and a concealed foot angle which allows plus or minus 1/2" vertical adjustment.

Curtains

Curtain rails fabricated of 300 series #4 finish stainless steel cylindrical tubing. Curtain hooks are steel wire with a zinc chromate finish. Curtains are 60" W x 74" H and fabricated of heavy gauge translucent vinyl with hemmed edges and aluminum grommet reinforced eyelets.

Hardware

All exposed fasteners are vandal-proof stainless steel. Post shoes are anodized aluminum and finished to match stainless steel.