Bradley Lenox Locker Pedestal Bench Installation
1. Position each pedestal on the underside of the bench. Mark the hole locations and remove the pedestals. Using a 3/16" drill bit, drill 1/2" deep starter holes in the bench.
2. Secure the pedestals with the #14 x 1-3/4" screws provided.
3. Position flanges and mark hole locations on the floor. Remove the bench. Using a 1/4" masonry drill bit, drill starter holes in the floor 1-1/8" to 1-1/4" deep.
4. Insert a stud, thread side up, into each hole. Place a washer and nut (flush) on top of the stud and tap on the nut with a hammer until seated. Tighten nut to secure bench(es).
| Related Articles |
> Installation Instruction for Bradmar Partitions
> INSTALLATION INSTRUCTIONS FOR BOBRICK LAMINATED PLASTIC TOILET PARTITIONS
1030 TrimLine™ Series • 1040 Designer™ Series • 1840 FRP™ Series
> INSTALLATION INSTRUCTIONS solid phenolic TOILET partitions
1080 DuraLineSeries™ • 1180 DuraLineSeries™ Class-A Fire Rated
> INSTALLATION INSTRUCTIONS 1090 SIERRA™ SERIES TOILET PARTITIONS
WITH HEAVY-DUTY HARDWARE
> INSTALLATION INSTRUCTIONS LAMINATED PLASTIC TOILET partitions
1540 ClassicSeries™ with Options
> Bradley Lenox Locker Installation Instructions
> Bradley Lenox Locker Bench Installation
> Bradley Panelon Shower system installation Instructions
> Bradley Column shower Installation Instructions
> Bradley Column beach Shower COL-5C-HN, COL-4C-HN, COL-3C-HN, COL-2C-HN Installation
> Bradley Column beach Shower COL-5C-HN, COL-4C-HN, COL-3C-HN, COL-2C-HN
> Bradley Adapt-A-Brad Conversion instructions
> Installation Instructions for Bradley 1W (Bradsole), 2W, 3W, 1K
& 1F Econo-Wall™ Showers
> Bradley WS-2WMD Dual Station Wall saver Shower (Multi Stall ) Stainless Steel,Bradley WS-3WMT Three Station Wall Saver Shower installation instructi
|
|