Knowledge Base:  

You are here: Knowledge Base : mounting
Page of 1
TB-32 Suggested Mounting Systems for Ceiling hung toilet partitions
Provisions must be in the construction of the building to support ceiling-hung toilet partitions. Structure in ceiling, not furnished by Bobrick, must support at least 200 lb per laminated-plastic par
TB-46 Suggested Mounting Systems for Floor-Anchored and Overhead Braced Toilet Partitions
LEVELING DEVICE The steel-core reinforced stiles of Bobrick floor-anchored and overhead-braced toilet partitions are constructed with an 11-gauge steel core welded to a 3/8'' thick leveling bar. Each
TB-34 Threaded Metal Inserts Reinforce Door & Stile hardware in all Bobrick Partitions
Bobrick's standard partitions have superior holding power built in, using Commercial Hardware in an unique nohardware- on-the-outside styling. In doors and stiles with particle board core (TrimLine, D
TB-49 CONCEALED ANCHOR PLATES FOR STUD WALL CONSTRUCTION
Bobrick anchor plates are designed for secure installation of all Bobrick grab bars specified for stud wall construction. The hole pattern(s) will accommodate all the mounting screw configurations fou
CSI Specification Guidelines Section 15400
Specifier notes are shown in italics and should be deleted from the final document. Generally all of the manufacturer’s products in this category are listed and the specifier must take care to dele
Bradley Lenox Locker Installation Instructions
Lenox Locker Installation instructions Step 1: Optional Locker Base Installation IMPORTANT: Make sure the base is square AND level before anchoring to the floor (the base may be square but not
Bradley Panelon Modular Shower System Technical Data
Bradley Panelon Showers — Prefabricated Modular Shower Systems Specifications Materials Panelon showers constructed of type 304 stainless steel. Shower panels and stanchions are 16 gau
Bradley Column beach Shower COL-6C
Column Showers 6-Person COL-6C Specifications Materials All exposed parts are type 304 stainless steel or polished chrome-plated brass. Valve manifold is cast brass. Drain fitting is c
Bradley Column beach Shower COL-5C-HN, COL-4C-HN, COL-3C-HN, COL-2C-HN
Barrier-Free Column Showers 2- to 6-Person COL-2C-HN, COL-3C-HN, COL-4C-HN, COL-5C-HN, COL-6C-HN Specifications Construction Materials All exposed parts are type 304 stainless steel
Bradley WS-1k-HN Individual Pivoting Wall Shower
Corner- Mounted Barrier-Free Wall Shower WS-1K-HN • Completely Preassembled Corner-Mounted Shower Unit • Ideal for Barrier-Free Shower Rooms Specifications Barrier-Free Seat Loca
Bradley WS-2W-HN, WS-3W-HN Econo-Wall™ Showers
Barrier-Free — Econo-Wall Shower WS-2W-HN, WS-3W-HN    • Completely Preassembled Shower Unit • Ideal for Barrier-Free Shower Rooms   Specifications Barrier-Free
Bradley WS-2WMD Dual Station Wall saver Shower (Multi Stall ) Stainless Steel,Bradley WS-3WMT Three Station Wall Saver Shower installation instructi
Installation Instructions Step 1: Install shower NOTE: Flush supply lines before making connections. 1. Rough-in supply piping to your shower as shown in Figure 1. NOTE: Use the cold inlet locat
Modesty Module Showers Models 4000 thru 4036 & Model 4044
Modesty Module Showers Models 4000 thru 4036 & Model 4044 (IMPORTANT: Signed approvals are required prior to fabrication.) • Unit Complete with Curtain and Necessary  Hardware
Modesty Module Showers Models 4000 thru 4036 & Model 4044
Installation Instructions Step 1: Install floor anchors 1. Install your Bradley shower as instructed on the shower installation instructions provided with your new shower. 2. Check dimensions on
TB-75 TYpes Of Stainless Steel
Stainless steel is a term covering more than fifty alloys of steel, all with chromium and additives to counteract the rusting of iron, the basic mineral in steel. Many of the stainless varieties are
Bradley Column beach Shower COL-5C, COL-4C, COL-3C, COL-2C
Column Showers 2- to 5-Person COL-5C, COL-4C, COL-3C, COL-2C • One Set of Supply Connections Required for Five Stations • Preassembled, Complete with Drain Fitting Specifications Ma
Installation Instructions for Bradley 1W (Bradsole), 2W, 3W, 1K & 1F Econo-Wall™ Showers
Installation Instructions for Bradley 1W (Bradsole), 2W, 3W, 1K & 1F Econo-Wall™ Showers Supplies required for installation: • Water supply inlets for 1/2" type “L” copper tube for 1K and 1W show